ORSON HUB PULLER TOOL
Hub Puller to suit Rudge Whitworth wire wheel hubs. BRITISH MANUFACTURE BY ORSON
The part is manufactured from high strength steel. Supplied with a bolt of toughened steel. The tool is dual threaded with a left hand and right hand 8TPI or 12 TPI thread. Simply remove the bolt and swap to the other side. Comes with tommy bar holes to ensure tight hand fit on the hub.
Simple to use. Remove spinner, wheel and hub. Locate the puller on the correct side and thread down as far as possible by hand – nip tight with tommy bar. Apply the bolt with spanner or socket.
Tighten bolt on regular intervals and the shaft will be removed. Applying penetrating oil may aid the process.
Click on link Below to establish which tool suits your vehicle.
HUB PULLER 42 TYPE 8TPI
Type 42 8 TPI (K021/8) – Website Price £136.25 +Shipping + VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle.
This will fit cars which have a Type 42 wheel and an 8 TPI (threads per inch) pattern. This will fit Morgan, Triumph, Bugatti, Ferrari.
It will fit some MG (check for thread pattern? some have 12 TPI), Austin Healey, again some have 12 TPI please check.
Please Check if unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 42 TYPE 12 TPI
Type 42 12 TPI (K021/12) – Website Price £136.25 + Shipping +VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle.
This will fit cars which have a Type 42 wheel and a 12 TPI (threads per inch) pattern. This will fit early MG TC, TA, TB Etc and Early Austin Healey.
Please Check If unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 52 TYPE
Type 52 8 TPI (K020) – Website Price £136.25 + Shipping + VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle. This will fit cars which have a Type 52 wheel and an 8 TPI (threads per inch) pattern. This will fit Jaguar, Old Aston Martin, and Old AC, Jensen and Alvis.
Please check if unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 62 TYPE
Type 62 8 TPI (K1644) – Website Price £204.25 + Shipping + VAT
Universal tool which will serve both Left hand and Right hand side of the vehicle.
This will fit cars which have a Type 62 wheel and an 8 TPI ( threads per inch) pattern.
This will fit early Bentley and Rolls Royce, Vauxhall ETC
Please Check if unsure. CLICK HERE TO ORDER PRODUCT
![Hub Puller](https://www.orsonequipment.co.uk/wp-content/uploads/2019/12/Hub-Puller-e1576847650420.jpg)
![Hub Puller 2](https://www.orsonequipment.co.uk/wp-content/uploads/2019/12/Hub-Puller-2.jpg)
![Hub Puller 1](https://www.orsonequipment.co.uk/wp-content/uploads/2019/12/Hub-Puller-1.jpg)