Austin Healey 100/4 BN1 – 2 x LH & 2 X RH Front & Rear Hubs (K270/271 & K360/361)

Description

For Information:

Austin Healey 100/4 BN1 & BN2 complete Hub replacement requirements as follows

BN1 – Integral Front and Bolt-on Rear 12 TPI (Fine Thread):

K361 – Front Left
K360 – Front Right
Integral fitting hubs so no nuts necessary

K271 – Rear Left
K270 – Rear Right
The original “Philedas Nuts” can be used for the Bolt-on rear splines but it is recommended to replace them. The BN1 has BSF Thread.
Bolt-on splines were fitted as original equipment to this vehicle so will not increase the track
__________________________________________________________________________

BN2 – Integral Front and Bolt-on Rear 12 TPI (Fine Thread):

K393 – Front Left
K392 – Front Right
Integral fitting hubs so no nuts necessary

K271 – Rear Left
K270 – Rear Right
The original “Philedas Nuts” can be used for the Bolt-on rear splines but it is recommended to replace them. The BN2 has UNF thread.
Bolt-on splines were fitted as original equipment to this vehicle so will not increase the track

Studs will require shortening,